Free camper van layout planner

Plan your van conversion using real van dimensions. Start with a blank camper van floor plan or customize a ready-made layout, then check how everything fits in 3D.

Free · no sign-up · runs in your browser

Plan your camper conversion in 2D, check it in 3D, picture it with AI

Design your camper van layout online for free: draw the floor plan, look at it from every side in 3D, and if you like, let AI show you what the finished van could look like.

  1. 2D floor plan of a Fiat Ducato L2H2 with a double bed at the back, a bench, two kitchen units, a toilet and a shower
    1

    Lay it out in 2D

    Place the bed, kitchen, shower and storage on a top-down plan in centimetres or inches, with the wheel arches and sliding door to scale.

  2. The same Ducato layout in the 3D view: double bed, bench, kitchen units, toilet and solar panels on the roof
    2

    Check it in 3D

    Turn your floor plan into an interactive 3D camper van. Explore your conversion from every angle, see its true height and proportions, and catch cramped spaces before you start building.

  3. AI preview of the Ducato layout as a finished conversion parked by the sea, with a made bed, green kitchen and a shower
    3

    Picture it with AI

    Turn your layout into a realistic image and explore different interior styles, colours and moods before you build. See which look feels right for your van. AI can also create a starting layout from a description.

How to plan your van layout

  1. 1

    Pick your van

    Choose one of 48 built-in vans (Mercedes Sprinter, VW Crafter, Fiat Ducato / Peugeot Boxer / Citroën Jumper, Ram ProMaster, Ford Transit, Renault Master, VW T5/T6/T6.1 ), or enter your own van's measurements.

  2. 2

    Create your floor plan

    Start from scratch, customize a ready-made layout or let AI create a first plan from your description. Then arrange everything to fit your van, all to scale in centimetres or inches.

  3. 3

    Plan water, gas and electrics

    On the Electrics layer, draw 12 V, 24 V, 230 V and solar runs to the battery, charger, inverter and loads; on the Water & Gas layer, fresh, hot and grey water and the LPG line. The shopping list adds up furniture, components and cable lengths.

Mercedes Sprinter L3H2 floor plan with 12 V DC runs to the fridge and bench, and fresh and grey water lines at the kitchen

Why plan your van conversion in 2D first

  • Fit first, details later

    A top-down plan shows in minutes whether a fixed bed, a shower or a garage fits. No 3D modelling to learn.

  • Compare vans before you buy

    Lay up to three vans over each other and see which one fits your layout.

  • No account needed

    Without signing in, your plans stay in your browser; export them as a file to back them up or move them to another computer. If you sign in, your plans are kept in your account and open on any device.

Why I built it

I wanted to build out my own van, but I didn’t know which van to look for. Sprinter, Crafter, Ducato and Transit all differ in length, width and where the wheel arches sit, and that decides whether a fixed bed or a shower fits.

I also didn’t want to go the paper-cutout route to plan the layout. I wanted something simple, but powerful enough to get me about 80% of the way there. So I built LayoutMyVan.

Planning stays free, with no ads and no account needed. Tips from people who use it and the optional AI credits pay for keeping it running.

From the blog

All articles →

Frequently asked questions

Is the van layout planner free?

Yes. Planning in 2D and 3D is free, with no account and no download. Only the AI layout and the AI preview use credits, bought once with no subscription. If it helps with your build, you can leave a tip.

Does it work on my phone?

Yes. The planner runs in the browser on phones, tablets and computers, with no app to install. With a free account, the same layouts open on all of them.

Which vans can I plan?

Mercedes Sprinter (L1H2 to L4H3, rear- and front-wheel drive), VW Crafter (L3H2 to L5H4), Fiat Ducato / Peugeot Boxer / Citroën Jumper (L1H1 to L4H3), Ram ProMaster (118", 136", 159" and 159" EXT, low, high and super high roof), Ford Transit (L2H2 to L4H3), Renault Master / Opel Movano (L1H1 to L4H3), VW T5/T6/T6.1 (short and long wheelbase) and Citroën Jumpy. For any other van or bus, enter your own measurements.

How accurate are the van dimensions?

Cargo length and width, the gap between the wheel arches and the sliding door width come from the manufacturers’ spec sheets and technical drawings. Wheel arch positions follow from the official wheelbase and overhangs. Linings and model years differ, so measure your own van before you cut anything.

Can I plan plumbing and electrics?

Yes. Electrics (12 V, 24 V, 230 V and solar) have their own layer, and water and gas share another. The shopping list totals the cable and hose lengths and the components you placed.

Where are my plans saved?

Without an account, in your browser, on your own device. Use Export to save a file that you can import again on another computer. If you sign in, they're saved to your account and open on any device. Share creates a link that others can open a copy of your layout from.

Is it a 3D van design tool?

Yes. Draw the layout in the top-down 2D plan, then switch to the 3D view to see your van with the furniture at its real height. Turn it around, look from the inside, and move or resize furniture there. Add a pop-top, roof tent, awning, windows and solar panels to see the whole van. It is built for fit and measurements, not for construction drawings of furniture.

Can AI design my van layout?

If you want it to. Describe your van and how you travel, add photos or links to builds you like, and AI draws a first layout that you then change in the planner. The AI preview turns a layout into a photo-like picture of the finished van. Both need an account and use credits, bought once with no subscription. Planning in 2D and 3D stays free.

Free camper van layout planner

Start planning your van →