The Mercedes Sprinter's interior dimensions come down to one width and three lengths. Every current Sprinter (2018 onwards) has a cargo floor 179 cm (70.5 in) wide. It is 327 cm (128.7 in) long in the 144, 430 cm (169.3 in) in the 170 and 470 cm (185 in) in the 170 EXT. Between the wheel arches you get 135 cm (53.1 in) with rear-wheel drive and 141 cm (55.5 in) with front-wheel drive. The high roof gives 201 cm (79.1 in) of cargo height.
Below are the full numbers for every length and roof, in centimetres and inches. You also get where the wheel arches and the sliding door sit, how much of it is left once the van is insulated, and what that means for the bed and the galley.
Sprinter interior dimensions at a glance
These are the bare cargo floor dimensions at floor level, measured from the back of the cab partition to the rear doors. They come from Mercedes' technical drawings for the 2018+ Sprinter (model year 2022). The positions of the wheel arches and the sliding door are measured from the rear doors, because that is where you start building.
| Sprinter | Floor length × width | Between wheel arches | Wheel arches (from the rear doors) | Sliding door (from the rear doors) | Cargo height | Outside length |
|---|---|---|---|---|---|---|
| 144 RWD (L2H2) | 327 × 179 cm | 135 cm | 61–153 cm | 189–315 cm | 201 cm | 593 cm |
| 144 FWD (L2H2) | 327 × 179 cm | 141 cm | 36–129 cm | 189–315 cm | 208 cm | 593 cm |
| 170 RWD (L3H2) | 430 × 179 cm | 135 cm | 98–190 cm | 292–418 cm | 201 cm | 697 cm |
| 170 super high roof (L3H3) | 430 × 179 cm | 135 cm | 98–190 cm | 292–418 cm | 224 cm | 697 cm |
| 170 EXT (L4H2) | 470 × 179 cm | 135 cm | 138–230 cm | 332–458 cm | 201 cm | 737 cm |
| 170 EXT super high roof (L4H3) | 470 × 179 cm | 135 cm | 138–230 cm | 332–458 cm | 224 cm | 737 cm |
| L1 FWD (L1H2, Europe) | 261 × 179 cm | 141 cm | 36–129 cm | 123–249 cm | 208 cm | 527 cm |
The 144 and 170 are the wheelbases in inches (3665 and 4325 mm). In Europe they are sold as the L2 and L3, and the 170 EXT as the L4, which has the same wheelbase as the 170 with a longer rear overhang. The sliding door is 126 cm (49.6 in) wide in every version and sits on the passenger side.
The same numbers in inches
| Sprinter | Floor length × width | Floor area | Between wheel wells | Wheel wells (from the rear doors) | Cargo height |
|---|---|---|---|---|---|
| 144 RWD | 128.7 × 70.5 in | 63 sq ft | 53.1 in | 24.0–60.2 in | 79.1 in |
| 144 FWD | 128.7 × 70.5 in | 63 sq ft | 55.5 in | 14.2–50.8 in | 81.9 in |
| 170 | 169.3 × 70.5 in | 83 sq ft | 53.1 in | 38.6–74.8 in | 79.1 in (super high roof 88.2 in) |
| 170 EXT | 185.0 × 70.5 in | 91 sq ft | 53.1 in | 54.3–90.6 in | 79.1 in (super high roof 88.2 in) |
Floor area is length × width, as if the wheel wells weren't there. US dealer sheets sometimes list a few inches more cargo length, for example about 133 in for the 144. They measure to a different point, so for a layout use the floor you can actually build on and check it with a tape measure in your own van.
The three lengths side by side
Laid on top of each other, three things stand out:
- The wheel arches move with the wheelbase. In the 144 they start 61 cm from the rear doors. In the 170 they start at 98 cm, and in the 170 EXT at 138 cm, because the extra length of the EXT is all behind the rear axle.
- The space behind the arches is what changes your layout. 61 cm is not enough for a garage under the bed. 98 cm is enough for a garage that takes bikes with the front wheel off, or deep storage boxes. 138 cm is a proper garage.
- The sliding door stays at the cab. In every version it starts 12 cm behind the partition, so the extra floor of the longer vans all ends up between the door and the rear doors, which is where the bed usually goes.
Each wheel arch is about 92 cm long and 33 cm high in the rear-wheel-drive Sprinter. Anything you build over it, such as a bed, a bench or a garage, has to clear that height or step around it.
Front-wheel drive vs rear-wheel drive
The front-wheel-drive Sprinter has the same 327 × 179 cm floor as the rear-wheel-drive 144, but it is a different van to plan:
- The wheel arches sit further back, 36–129 cm from the rear doors instead of 61–153 cm. That leaves almost no room behind them, but a longer full-width floor in front of them for a galley or a wardrobe.
- They are further apart, 141 cm instead of 135 cm. That is 6 cm more between them for a shower tray, a fridge or a lengthwise bed that drops between the arches.
- The floor is about 8 cm lower, so the cargo height grows from 201 to 208 cm in the high roof. It also makes the van easier to step into.
- The arches are taller, about 40 cm instead of 33 cm.
So pick the drive before you draw anything. A rear bed over the arches works in both, but a garage under the bed needs the room behind the arches that only the rear-wheel-drive 170 and 170 EXT have.
Cargo height: H1, H2 and H3
| Roof | Cargo height (RWD) | Cargo height (FWD) | After about 10 cm of floor and ceiling |
|---|---|---|---|
| Standard roof (H1) | 172 cm (67.7 in) | 179 cm (70.5 in) | about 162–169 cm |
| High roof (H2) | 201 cm (79.1 in) | 208 cm (81.9 in) | about 191–198 cm (6 ft 3 in – 6 ft 6 in) |
| Super high roof (H3) | 224 cm (88.2 in) | — | about 214 cm (7 ft) |
The heights are bare metal, floor to roof at the centre. A typical build takes about 4 cm for the insulated floor and 6 cm for the ceiling, which is where the last column comes from. Roof fans, LED strips and ceiling cabinets take more where they sit.
The high roof H2 is the usual camper Sprinter: most people can stand up in it after the build. The super high roof H3 adds 23 cm, which matters for two things: a raised bed over a garage with room to sit up, and a shower where you don't have to duck. The standard roof H1 is a van you sit in, not stand in. It suits a bench bed and a pop-top.
The outside height of the high-roof van is about 2.6–2.8 m (US dealers list about 107 in for the 144 and 170 high roof). It depends on the drive, the tyres and what is on the roof, so read it off your registration document before you try a car park or a ferry height limit.
How much is left after insulation
Bare dimensions are what you buy. What you live in is smaller. Plan with about 3 cm of wall build per side (insulation plus a panel) and the Sprinter looks like this:
| Bare | After the build | |
|---|---|---|
| Width at the floor | 179 cm (70.5 in) | about 173 cm (68.1 in) |
| Between the wheel arches | 135 cm (53.1 in) RWD | about 131 cm (51.6 in) once the arches are clad |
| Standing height, high roof | 201 cm (79.1 in) | about 191 cm (75.2 in) |
The walls also lean in above the belt line, so the van is narrower at bed and shoulder height than at the floor. Measure your own van at the height where the bed or the cabinets will sit.
What fits in a Sprinter
A crosswise bed is the most floor-efficient bed, but the Sprinter is one of the narrower vans for it. A bed should be about 10 cm longer than you are, so 173 cm between the finished walls suits sleepers up to about 163 cm (5 ft 4 in). Taller people sleep lengthwise or fit flares, bulged panels that add a few centimetres per side at bed height.
